Newsletter
Home > Resources > News & Events > News > Ten factors to consider when choosing a cabinet or rack
Navigation
 

Ten factors to consider when
choosing a cabinet or rack

Ten factors to consider when choosing a cabinet or rack

by Roberta B. Szyper

The sheer number and different types of cabinets and racks can make choosing the right one for your data centre a daunting task. But, if you consider your requirements one at a time, you can zero in on the right cabinet or rack for your application.


A cabinet is an enclosure with four rails and a door (or doors) and side panels. A rack is an open, freestanding 2- or 4-post frame that doesn’t have doors or sides. The decision on whether to use a cabinet or rack depends on a number of factors.

1. Equipment

Before you choose a cabinet or rack, you need to determine what equipment you’re planning to house. This list can include servers, switches, routers, and UPSs. Consider the weight of your equipment as well. The extra stability of a cabinet might be important if you’re installing large, heavy equipment like servers. An open rack is more convenient than a cabinet if you need frequent access to all sides of the equipment.


2. Environment

With the open design, racks are a good choice in areas where security isn’t a concern such as in locked data centres and closets. And racks typically cost less than cabinets.

Cabinets, on the other hand, protect equipment in open, dusty, and industrial environments. Aesthetics can be a factor too. Will customers or clients see your installation? A cabinet with a door looks much neater than an open rack. When you’re trying to create a professional image, everything counts.


3. Ventilation

If your equipment needs ventilation, a rack offers more air circulation than a cabinet. Even if your cabinet is in a climate-controlled room, the equipment in it can generate a lot of heat. The requirements for additional airflow increase as more servers are mounted in a cabinet. Options to improve airflow include doors, fans, and air conditioners.




4. Size

Width: The width between the rails in both cabinets and racks is 19 inches with hole-to-hole centers measuring 18.3 inches. But there are also cabinets and racks with 23-inch rails. Most rackmount equipment is made to fit 19-inch rails but can be adapted to fit wider rails.

Rack Units: One rack unit (RU or U) equals 4.45 cm (1.75 inches) of vertical space on the rails. A device that’s 2U high takes up 8.89 cm (3.5 inches) of vertical rack space. Rack units are typically marked on the rails. The number of rack units determines how much equipment you can install.

Depth: Cabinets and four-post open racks come in different depths ranging anywhere from 61 cm to 122 cm (24 to 48 inches) to accommodate equipment of varying sizes, particularly extra-deep servers. The rails on some cabinets and 4-post open racks are also adjustable to different depths.

When you consider the width, height, and depth of a cabinet or rack, clarify whether they are inside or outside dimensions.


5. Weight

Cabinets and racks vary in terms of the amount of weight capacity. Some cabinets can hold 500 kg or more. Carefully consider the weight of your equipment and decide where you want to mount it before choosing a cabinet or rack.


6. Rails

The vertical rails in cabinets and racks have holes for mounting equipment. Two-post racks typically have threaded 12-24 or 10-32 tapped holes. Four-post racks and cabinets often have M6 square holes for mounting servers.


7. Moisture, dust, shock, vibration

When housing electronic components outside of a protected data centre, look for a cabinet with an IP rating. IP standards are designed for corrosion resistance, protection from rain, submersion, liquids, dust, falling objects, and other hazards. Cabinets and racks can also be bolted to the floor for extra stability.


8. Power provisioning

There are multiple options for powering rackmounted equipment. Power strips can be mounted vertically or horizontally. Power Distribution Units (PDUs) and Power Managers have additional capabilities such as remote management and metering. Uninterruptible power supplies (UPSs) typically mount in the bottom of a cabinet or rack because of their weight.


9. Cable management

Most cabinets and racks have built-in cable management troughs and cable rings for routing cable. For a complete overview of our cable management solutions, visit our online store.


10. The extras

The type of shelving you choose depends on the equipment you plan to mount. There are multiple options: solid, vented, stationary, and pull-out shelves. And there are shelves built to hold specific pieces of equipment, such as servers or keyboards. Other extras include fans, waterfall brackets, and grounding bars.


For more information on our cabinets and racks, visit our online store, watch the videos below or contact our free Tech Support.



Videos

Videos

  • How to pick a cabinet
    How to pick a cabinet
  • How to pick a rack
    How to pick a rack
  • Climate Cab IT Enclosures
    Climate Cab IT Enclosures
  • QuietCab
    QuietCab

More videos...