In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
Monitors temperature and humidity on a single intelligent sensor port
Own SNMP OID for data collection via a network
Setup is simple with the Gateway Junior and gateway autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.
All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.
Certifications — RoHS and WEEE Measurement Accuracy Celsius — Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC Measurement Accuracy Fahrenheit — Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF Measurement Range — -40° to +75°C Temperature, 0 to 100% Relative humidity Measurement Resolution — 1°F for Gateway Junior and 0.1° for for the Gateway units for temperature. 1% for the Gateway Junior and 0.1% for the Gateway V4E units for humidity. Temperature Status OID — 1.3.6.1.4.1.3854.1.2.2.1.16.1.4.X Sensor Type — semiconductor microprocessor controlled Communications Cable — RJ45 jack to temperature sensor using UTP Cat5 wire Sensor Type — semiconductor microprocessor controlled Power Consumption — Typical 10.70 mWatt, 2.14mA Gateway Junior autodetects the presence of the temperature sensor. Typical 7.25 mWatt, 1.45mA for humidity Power Source powered by Gateway Junior. No additional power needed
Handlevogn
Logg inn
Kontakt oss
