DisplayPort - a digital interface standard to connect a computer with a display • DisplayPort - a digital interface standard • DisplayPort is a digital interface standard whose primary use is to connect a computer with a display or a high defi...

...including existing cables and the Mini DisplayPort connector. DisplayPort v1.2 increases performance by doubling the maximum data transfer rate from 10.8 Gbps to 21.6 Gbps, greatly increasing display resolution, color depths, refresh rates, and...

...do we modify existing cables and adapters, we also build them from scratch to your specs! UTP, fiber optic, RS-232, coax, A/V—tell us what you need, and we'll turn your ideas into reality. • Cable options: • CAT3/CAT5e/CAT6/CAT6a • Fibre: OM1/OM2/...

...greater than copper cables?. Its small size makes it easier to handle, and it takes up much less space in cabling ducts. Although fibre is still more difficult to terminate than copper is, advancements in connectors are making termination easier...

...and expensive SCSI cables. And, unlike many older interfaces, you never need device IDs, jumpers, DIP switches, screws, latches, or terminators. • There are two types of FireWire connectors: 6-pin and 4-pin. The 6-pin connector, usually found o...

...money. • Computer cables can only be too short, but never too long. The same applies to networking cables. Sometimes it is just the last meter that is missing, but in many cases some kilometres are missing. A standard 10/100 or 10/100/1000 Cop...

...connecting IEEE-488 cables, some rules apply. The total number of devices should be 15 or less. The total length of all cables should not exceed 2 metres multiplied by the number of connected devices, up to a maximum of 20 metres. And no more th...

Crosstalk • Crosstalk • Near-End Crosstalk (NEXT) • One of the most important cable measurements is Near-End Crosstalk (NEXT). It’s signal interference from one pair that adversely affects another pair on the same end. Crosstalk occurs between...