...systems , and other industrial automation systems . 4.1 Pull - Ups Nine or ten pin bussed resistor packs are installed to provide pull - ups to input ports . These are installed on all ports . The pull - up resistor packs are rated 10 K ohms . B...
...sure the PC has the Ethernet RJ - 45 connector attached to the switch via standard Ethernet LAN cable . STEP 2 : Reconfigure the PC’s IP address and Subnet Mask as below , so that it can communicate with the switch . The method to ® change the P...
...which are used on Ethernet leads and patch cables . The pin - outs for both types of connectors are listed in Appendix C . Chapter 2 : Overview 877 - 877 - 2269 | blackbox.com Page 11 2.6 Hardware Description , Multihead Versions ( KV2204A , K...
...connection or over your Ethernet LAN . The 4 - Port USB 2.0 Extender over LAN uses inexpensive UTP cable you may already have installed in your building or your existing LAN architecture for easy , cost - effective USB extension . It’s ideal for USB...