...Using fibre optics for KVM extension • Using fiber optics for KVM extension. • Where to use? • If you‘re sending KVM signals between buildings for an extended distance, in areas supplied by different power sources, in an electrically noisy environm...
...forward. Most of the equipment was extremely expensive compared to labour costs. Hardware such as dumb terminals was often replicated across a single site in large numbers. This made the cost of on site and fast response maintenance a sensible perce...
...of cost-effective KVM over IP devices specially developed for the management of servers and serial network devices in IT branches - help you cope with these challenges. • They allow for fast and comfortable troubleshooting, reboots or cold sta...
...the total system • ServSwitch™ Brand CATx KVM Extenders feature controls that can be adjusted to restore image quality over long cables. • You can then manually adjust the video equalisation (fine-tuning the total system response from graphics ...
...a problem for many KVM switches, as they normally pass along mouse coordinates in a stream mode. This results in a CPU receiving data when it isn’t expecting it, and the mouse simply won’t function properly. • All ServSwitch™ products contain s...
...the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) function. In half-duplex mode, all Ethernet speeds use the CSMA/CD access method to resolve contention for shared media. For Gigabit Ethernet, CSMA/CD has been enhanced to mainta...
...solution is the new ServSwitch CATx KVM Extender with Built-in De-Skew and Multi Video Support (ACU2xxx series) It provides an individual built-in colour DeSkew of up to 42 ns (42 x 10-9 sec) in steps of 2.8 ns (approximately half a pixel size a...
...DDC is just the description of the interface, the true data that is exchanged between graphic adapter card and monitor is called EDID (Extended Display Information Data). This data exchange is for identification of the attached screens and to rea...
Shopping Basket
Sign in
